LCP-8 Holography Experiment Kit Enhance Model
Couldn't load pickup availability
Holography Experiment Kit Enhance Model
Based on the basic model (LCP-7), LCP-8 is a complete model that includes conventional silver salt holographic plates with related accessories. Apart from the experiments that can be conducted with LCP-7, LCP-8 can be used to conduct more experiments in a darkroom with the aid of a tri-color safety lamp for transmissive and reflective hologram recording, including two- and three-dimensional hologram, one- and two-step rainbow hologram, image plane rainbow hologram, holographic reproduction, holographic device fabrication (transmissive or reflective holographic grating, and holographic lens), and holographic storage. Note: a stainless steel optical table or breadboard (1200mmx600 mm x 600 mm) with optimal damping is needed for use with this kit.
Experiments
1. Fresnel holographic photography
2. Image plane holography
3. One-step rainbow holographic photography
4. Two-step rainbow holographic photography
5. Holographic grating fabrication
6. Holographic lens fabrication
7. High-density high-capacity holographic data storage
8. Holographic interferometry
9. Holographic reproduction
Specifications
Item |
Specifications |
Semiconductor Laser | Center Wavelength: 650 nm |
Line width: < 0.2 nm | |
Power > 35 mW | |
Exposure Shutter and Timer | 0.1 ~ 999.9 s |
Mode: B-Gate, T-Gate, Timing, and Open | |
Operation: Manual | |
Continuous Ratio Beam Splitter | T/R Ratio Continuously Adjustable |
Single-Sided Rotary Slit | Slit Width: 0 ~ 5 mm (continuously adjustable) |
Rotation Range: ± 5° | |
Holographic Plate | Photopolymer and Silver Salt |
Part List
Description | Qty |
Semiconductor laser | 1 |
Laser safety goggles | 1 |
Exposure shutter and timer | 1 |
Universal magnetic base | 12 |
Two-axis adjustable holder | 6 |
Lens holder | 2 |
Plate holder | 1 each |
Two-axis adjustable holder | 1 |
Sample stage | 1 |
Single-sided rotary slit | 1 |
Objective lens | 1 |
Beam expander | 2 |
Lens | 2 |
Plane mirror | 3 |
Continuous ratio beam splitter | 1 |
Small object | 1 |
Red sensitive polymer plates | 1 box (12 sheets, 90 x 240 mm per sheet) |
Silver salt holographic plates | 1 box (12 sheets, 90 x 240 mm per sheet) |
Tri-color safety lamp (red, green, or yellow) | 1 |
Illuminometer | 1 |
Information slide | 1 |
Fixed ratio beam splitter | 2 |
Instruction manual | 1 |
Note: a stainless steel optical table or breadboard (600 mm x 600 mm) with optimal damping is needed for use with this kit.