A2.4.1.4 On-Board Computer Leybold Physics Lab Experiment

$26,920.00

Materials and equipment for teaching Physics labs, advanced science experiment apparatus, Leybold

On-Board Computer

Traditional monitoring of fill levels and temperatures occurs with modern control units. Current measurements in conductor loops give information on a worn brake pad.

Moreover, various fill level sensors provide data that is shown to the driver optically and/or acoustically. The “on-board computer” educational system monitors:

  • the coolant and the windshield washer fluid levels,
  • the brake fluid and motor oil levels,
  • the wear on the brake pads,
  • the motor oil and coolant temperatures.

The oil sensor is a continually measuring thermal oil level and oil temperature sensor (TOG) that can be filled with motor oil. Optionally, regulation resistors can simulate the signals. The signal produced converts the information on the oil into a combined PWM (pulse-width modulation) and PFM (pulse-frequency modulation) signal, that Sensor-CASSY can chart, for example.

The signal from the coolant’s temperature sensor can also either triggered either by immersion into warm water or by setting a potentiometer. An appropriate holder is available for parallel temperature measurement with a temperature sensor (666212). In the uncoupled state, the real temperature and the resistance can for example be measured with Sensor-CASSY and analyzed as an NTC curve.

All values can also be displayed in the self-diagnosis with the instrument cluster’s diagnosis line; linearized values for oil level and temperature and coolant temperature are available with a 9-pole socket for the oil sensor for measurements or integration into a CAN bus system.

COMPONENTS OF EQUIPMENT SETS:

1 739 707 Sensor panel 1
1 739 708 Sensor panel 2
1 739 706 Oil sensor
1 739 6021 Instrument cluster unit
1 738 975 Diagnostic Plug 16 Pin
1 738 10 Ignition switch
1 738 295 Central electrics
1 738 06 12 V on-board socket

Measuring equipment

1 737 9803 ** OBD Adaptor CAN+USB
1 524 013S ** Sensor-CASSY 2 Starter
1 524 0033 * WiFi adapter for Sensor-CASSY
1 739 589 ** Software: Vehicle diagnosis, German and English
1 524 031 ** Current source box
1 524 044 ** Temperature sensor S, NTC
1 773 961 * CAN-Databus-Multi-Adapter
 
1 577 56 Resistor, 10 kΩ, STE 2/19
1 579 13 Toggle switch, STE 2/19
1 579 06 Lamp holder, E10, top, STE 2/19
1 505 09 Bulbs, 12 V/0,1 A, E10, set of 10
1 578 40 Capacitor (electrolytic), 470 µF, STE 2/19
1 578 51 Diode, 1N 4007, STE 2/19
1 578 74 Transistor, BD 138, PNP, emitter top, STE 4/50
1 579 21 Relay with change-over switch, STE 4/50
1 577 32 Resistor, 100 Ω, STE 2/19
1 577 35 Resistor, 200 Ω, STE 2/19

Accessories

1 738 02 ** Automotive power supply 13.8 V/36 A
1 650 671 * Storage tray, S24, STE
1 590 48 Immersion heater
3 501 48 Bridging plugs, STE 2/19, set of 10
1 501 45 Connecting lead, 19 A, 50 cm, red/blue, pair
1 726 50 Plug-in board, 297 mm x 300 mm, STE
1 577 79 Variable resistor, 1 kΩ, STE 2/19
1 577 321 Resistor, 120 Ω, STE 2/19
1 579 163 Simulation ABS/Ti
1 739 195 Connecting Leads, set of 7
1 726 10 Panel frame T150, two-level
1 738 9821 Safety experiment cables, set of 51
3 500 59 Safety bridging plugs, black, set of 10
2 500 592 Safety bridging plugs with tap, black, set of 10
1 727 585 * STE universal case
1 775 043DE LIT: A2.4.1.4 On-board computer
1 775 043EN LIT: A2.4.1.4 On-board computer
1 738 01 * Cable and plug box
1 738 4911S * Automotive fault simulator, start
1 500 593 * Fault simulation plugs, black, set of 1
1 650 671 * Storage tray, S24, STE
1 739 03 ** Knocking Sensor
1 575 24 ** Screened cable, BNC/4 mm
1 501 091 ** BNC T adapter
1 689 0815 ** Set of 10 magnets

Articles marked with ** are additionally required.

Articles marked with * are not essential, we do however recommend them to carry out the experiment.

Materials and equipment for teaching Physics labs, advanced science experiment apparatus, Leybold

Additional information

Weight 98 lbs
Dimensions 105 × 89 × 12 in
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)