Diesel Quick Start System
In addition to the familiar preheating for improved starting characteristics of a compression-ignition engine, controlled post-heating quickly warms the combustion chamber, thus reducing exhaust gas emissions. A separate µC-controlled heat control unit is installed for activation of the heater plugs. This unit receives information on the time period and duration of the heating process from the engine controller. The heat control unit then activates the heater plugs and reports any possible disruptions to the engine controller using the integrated diagnostics feature. In order to minimise the power consumption during heating, the heater plugs are activated with a PWM signal with a delay.
Heater plugs with integrated pressure sensors are used to monitor the pressure in the combustion chamber. In this case the heat plug is mounted so that it exerts the force applied to the heat plug by the combustion chamber pressure to a measuring diaphragm. The pressure signal is also sent to the engine controller, where it is further processed. This way, for example, the injection period of the main injection can be changed as a corrective measure.
COMPONENTS OF EQUIPMENT SETS:
|1||738 10||Ignition switch|
|1||740 306||Diesel Quick Start System|
|1||738 151||Telltales Kl|
|1||524 013SKFZ||** Sensor-CASSY 2 Starter, Automotive|
|1||524 013S||** Sensor-CASSY 2 Starter|
|1||524 0033||* WiFi adapter for Sensor-CASSY|
|1||524 0673||** NiCr-Ni adapter S, type K|
|1||529 676||** Temperature probe, NiCr-Ni, 1.5 mm, type K|
|1||739 580||** Databus detector|
|1||739 836||** Milliohm meter|
|1||313 033||* Electronic time clock P|
|1||313 17||** Hand-held stop-watch II, mechanical|
|1||738 044||AGM-battery 12V|
|1||738 043||Vehicle battery connecting kit|
|1||738 021||** Battery charger, automation|
|1||738 05||Connection leads I, set|
|1||726 19||Panel frame SL85, single-level|
|1||500 59||Safety bridging plugs, black, set of 10|
|1||500 592||Safety bridging plugs with tap, black, set of 10|
|4||500 641||** Safety connecting lead, 100 cm, red|
|4||500 617||** Safety Connection Lead 25 cm brown|
|1||500 421||Connecting lead 19 A, 50 cm, red|
Articles marked with ** are additionally required.
Articles marked with * are not essential, we do however recommend them to carry out the experiment.
Materials and equipment for teaching Physics labs, advanced science experiment apparatus, Leybold